What are the key points for installing interior decorative lamps? What are their installation methods?

Interior decorative lamps can bring unexpected effects to a space. When you turn on decorative lamps at night, you will feel as if you have stepped into a dream like home environment. Of course, such effects can only be achieved if you master the key points and installation methods. Otherwise, even the most exquisite lamps cannot deliver their intended effects without proper design and installation. What are the key points for installing interior decorative lamps? What are their installation methods?

1. The light from interior decorative lamps should be as soft as possible, avoiding extremes of excessive brightness or dimness. Do not blindly pursue high brightness for indoor lighting. A standard of approximately 6 watts per square meter is recommended. Avoid overly dazzling decorative materials and lamps.
2. Green toned light is relatively gentle on the eyes. Excessive use of single color lights such as red or yellow may impair eyesight. Purchase lamps from formal stores. Substandard lamps feature low luminous efficiency. Prolonged exposure may cause eye photophobia, tearing, conjunctival congestion and swelling, and even vision loss.
3. Before installation, lamps and their accessories shall be complete, free from mechanical damage, deformation, paint peeling and lampshade breakage. The wire core of conductors leading to each lamp shall comply with relevant codes and specifications according to the installation location and application of the lamp.
4. When installing wall mounted and other lamps indoors, reliable earthing shall be provided for metal housings of lamps installed at a height of 2.4 meters or below to ensure safety. An earthing wire shall be added at the lamp box during wiring . https://uk.pinterest.com/kabolighting/
5. 

Installation Methods for Interior Decorative Lamps

There is a wide variety of interior decorative lamps. Only installation procedures for selected types are introduced below.

https://www.linkedin.com/feed/foryou/

1. Chandeliers: Similar to ceiling lamps, start with fixture fixation. Mark drilling positions, drill holes with an impact drill, and drive expansion screws into the holes. Fasten flat head screws to secure the base. Connect power wires and wrap exposed copper conductors with insulating tape. Connect the suspension rod to the base and adjust to a suitable height. Finally, fit the lampshade and bulb.
2. Spotlights: Spotlights are mostly recessed mounted. Reserve circuits in accordance with decoration plans and ask workers to cut openings in the ceiling and leave appropriate recessed slots for spotlights. Fit the base inside the slot, pull out electrical wires, and tighten fixing screws. Make wire connections with proper insulation treatment, then install the spotlight unit.
3. Ceiling lamps: Place the base plate at the intended mounting position and mark drilling points. Drill holes with an impact drill and drive fasteners such as expansion screws into the holes. Feed ceiling electrical wires through openings in the base plate and fasten the base plate with screws. Connect household wires to the base plate wires; wrap all exposed joints with insulating tape. Install bulbs and lampshades afterwards.

As you can see from the above content, the dream like lighting effect at home comes from relatively complex installation work. To obtain satisfactory lighting performance, it is essential to fully understand the key points and methods for installing interior decorative lamps.

Lamps combine practical functions with decorative features. As major indoor lighting facilities, they not only add visual interest to plain walls but also help set the indoor atmosphere.

1. Install lamps after wall plastering, interior painting and site cleaning are completed.
2. Before installation, ensure embedded parts and reserved holes are not omitted or misplaced, and that their positions, quantities and dimensions conform to design requirements.
3. Prepare installation tools: electric drill, electric hammer, wire crimp caps, special crimping pliers, tape measure, saw, saw blades, cotton work gloves, and step ladders.

Application Scenarios for Different Lamp Types

(1) Surface mounted illuminates: Attached to ceilings. Suitable for rooms with smooth ceilings and low ceiling heights. They brighten the ceiling surface yet may cause glare with relatively low light utilization efficiency.

(2) Recessed illuminates: Mostly or fully embedded into ceilings, with only the light emitting surface exposed. Suitable for low ceiling rooms. Ceilings generally appear dark and lighting efficiency is moderate; better performance can be achieved with highly reflective ceiling finishes.

(3) Suspended illuminates: Hung from ceilings. Classified by hanging hardware: cord hung, chain hung and rod hung. Positioned close to working surfaces, they are widely used for general indoor lighting.

(4) Wall mounted illuminates: Fixed to walls. Wall lamps serve as auxiliary rather than primary lighting and offer strong decorative value. Due to low mounting height, they can easily produce glare, so low power light sources are commonly used.

(5) Multi arm combination illuminates: Also known as flower style lamps, assembled from multiple lamp units into decorative patterns. Available in suspended or surface mounted forms for decorative lighting. Large size models are typical for grand halls; smaller versions are used in hotels and conference rooms.

(6) Wall recessed illuminates: Mostly or fully embedded in walls or floor surfaces with only a small luminous area exposed. Often used as night lights in bedrooms, corridors and stairwells to provide dim overnight lighting without disturbing rest.

(7) Table lamps: Provide local task lighting on desks and workbenches.

(8) Garden lamps: Deployed in parks and hotel gardens. Integrated with landscape architecture, they deliver artistic appeal both day and night.

(9) Floor lamps: Used for local accent lighting, typically placed beside sofas and coffee tables.

General Installation Procedures

1. Lamp inspection: Check lamps for surface defects such as scratches, deformation, coating peeling and corrosion.
2. Lamp assembly: Assemble components following manufacturer instructions. Organize internal wiring and distinguish live wires from neutral wires by consistent wire color coding.
3. Lamp mounting: Installation steps vary by lamp type. The general sequence is: drill holes, align with mounting plate openings, drive expansion screws, and secure mounting brackets, ceiling plates and lamp bodies.
4. Power on test: After installation, switch on power and verify normal lamp operation.

Important Installation Notes

1. When selecting lamps, ensure their style and color match the home space atmosphere. B. For humid areas such as kitchens and bathrooms, reliable insulation must be implemented to prevent short circuits. C. Install all lamps strictly in accordance with manufacturer instructions. D. Concealed wiring inside suspended ceilings or decorative panels shall be protected by flame retardant conduits. E. A dimmable lighting system is recommended. Light brightness can be adjusted when illumination feels too dim or too harsh to create a comfortable living environment.

Contact us via:

Wechat/Whatsapp: +86-13760535468   or Email: jolie@kabolighting.com

Let us work together to find the best lighting options for your market.